The Different Stages Of Operation In A Water Treatment System

 Access to clean and safe water is a basic necessity for the people on the planet. Water from different sources must be first treated to make it fit for use in homes and other buildings. This is accomplished through the installation of water treatment systems. Since the water can be from different sources, it can have different levels of contaminants which will need to be removed or filtered out for the different purposes that the water is to be employed in. The water treatment system has a number of different stages through which the raw water must be processed. These stages are as follows:



1.       Coagulation: The raw water is collected in a reservoir or water tank, after which, coagulation is carried out to remove the majority of the contaminants. Chemicals may be added for this purpose which remove the fine particles by combining them with the heavy particles in the water which settle at the bottom of the tank by the action of gravity.

2.       Flocculation: In this step, the water is sent into a chamber where it is slowly churned with long-chain polymers which attach to the residue dirt and micro particles and create visible particles which can be separated out.

3.       Sedimentation: Post the flocculation, the semi-treated water is sent for sedimentation. The water from the flocculation chamber is drained into another chamber where it is circulated and then allowed to settle. During the settling process, the solid particles that remain in the water sink to the bottom of the tank to form a sludge. 

4.       Chlorination: In the final stage of the treatment of water in the wastewater treatment system, the water is filtered using sand filters or multi-bed filters. Chlorination and UV filtration of the water may also be carried out if it is to be used for domestic purposes such as cleaning and in the toilets.

5.       Supply: Thereafter, the treated water is supplied though a separate network of pipes and water pipe connector and supplied for utilization. Often, the pipes for the treated water are of a different colour to indicate the different quality of the water being supplied through them.  

For the best solutions for water treatment system, explore the solutions from Wavin, one of the leading manufacturers of sustainable water supply and management systems. 

Comments

Post a Comment

Popular posts from this blog

Benefits of Installing Wastewater Management System

Image
Water conservation has become a key agenda for the world today. Given the predicted shortages and the scarcity being faced in many parts of the world at present, saving and recycling water can serve as a measure to ensure everyone gets access to this natural resource. One of the ways this can be done is by the installation of a wastewater management system. A wastewater management system recycles the water disposed off from households, from toilets, rainwater & stormwater runoff, kitchen sinks, etc. and makes it safe for disposal to larger water bodies or for reuse in irrigation of crops. There are several benefits of installing wastewater management systems, which are listed as follows:
Read more

Factors to Consider When Choosing Pipes for Drainage System

For every building, commercial, industrial or residential, the installation of a drainage system is of the essence. The right choice of pipe networks in the drainage and sewage system makes a significant difference in ensuring accidental leaks which can affect the life of the construction itself, obliterates the foul smells which may arise from the flow of drainage and waste water. While the location of the pipes and the network, over the ground, or underground, also determines the choice of drainage pipe, the following technical factors are important for choosing the best pipes for the drainage system for your construction:
Read more